EN

how to build an outdoor bar height table

Views: 99 Author: Site Editor Publish Time: Origin: Site

If you love entertaining guests in your backyard, an outdoor bar height table is a great addition to your outdoor space. You can use it to serve drinks, appetizers, and even as a space to play games. In this article, we will show you how to build an outdoor bar height table that will be the envy of all your guests.

Materials Needed

The first step to building your outdoor bar height table is to gather all the necessary materials. Here is a list of items you will need:

  • Four 4x4x8 posts
  • Four 2x4x8 boards
  • Two 1x6x8 boards
  • One 1x4x8 board
  • Wood glue
  • 2.5-inch deck screws
  • 2-inch deck screws
  • Sandpaper
  • Stain or paint

Instructions

Now that you have everything you need, it's time to get started building your outdoor bar height table. Follow these simple steps:

Step 1: Cut the Posts and Boards

Cut four 4x4x8 posts to 42 inches in length. These will be the legs of your table. Next, cut four 2x4x8 boards to 48 inches in length. These will be the supports for the table.

Step 2: Assemble the Legs

Lay two of the 4x4 posts flat on the ground, with the remaining two posts standing upright on top of them. The standing posts should be positioned 14 inches in from the ends of the flat posts. Use wood glue and 2.5-inch deck screws to attach the standing posts to the flat posts.

Step 3: Assemble the Supports

Attach the supports to the legs, using wood glue and 2.5-inch deck screws. Space the supports evenly to create a stable base for your table. Once the supports are attached, flip the table over and use 2-inch deck screws to secure the legs to the supports.

Step 4: Add the Tabletop

Cut the two 1x6x8 boards to 60 inches in length. Lay them over the supports, leaving a small gap between them. This will allow for expansion and contraction of the wood. Use 2-inch deck screws to attach the boards to the supports.

Step 5: Add the Trim

Cut the 1x4x8 board into four 14-inch pieces. Attach them to the corners of the tabletop, using wood glue and 2-inch deck screws. This will give your table a finished look.

Step 6: Sand and Stain or Paint

Sand the entire table with sandpaper to smooth out any rough edges. Once the sanding is complete, apply the stain or paint of your choice. This will protect your table from the elements and enhance its overall appearance.

Conclusion

Building an outdoor bar height table is a fun and easy project that will provide you with years of enjoyment. Follow these steps, and you will have a beautiful table that will be the centerpiece of your outdoor entertaining space. Don't forget to invite your friends over to show off your new creation!"

INQUIRE
×

Contact Us

captcha
×

Inquire

*Name
*Email
Company Name
Tel
*Message