how to upholster open back chair

Upholstering an open back chair can be quite a challenge, especially for those who have never done it before. However, with the right tools and a bit of patience, anyone can upholster an open back chair like a pro. In this article, we'll take a look at the steps involved in upholstering an open back chair, including the tools you'll need and some tips on how to get a professional-looking finish.

Tools Needed

Before you begin upholstering your open back chair, you'll need to gather some tools. Here are some of the tools you'll need:- Staple gun- Staples- Upholstery needle- Upholstery thread- Scissors- Foam cushion- Batting- Fabric

Preparing the Chair

The first step in upholstering an open back chair is to prepare the chair. Remove any existing fabric on the chair and take off the seat cushion. Clean the chair thoroughly to remove any dirt, dust, or debris. Next, measure the seat and back of the chair to determine how much fabric and foam cushion you'll need. You can use a foam cushion as a guide, or you can create a cardboard template to help you get the right size.

Upholstering the Seat Cushion

Once you have the right size foam cushion, you can begin upholstering the seat cushion. Begin by cutting a piece of batting that is slightly larger than the cushion. Place the foam cushion on top of the batting and trim the excess batting so that it is flush with the edges of the cushion. Next, cut a piece of fabric that is big enough to cover the cushion and wrap around the edges. Place the fabric on top of the batting and foam cushion, making sure it is centered and straight. Staple the fabric to the underside of the cushion, pulling it taut as you go. Make sure the corners are neatly folded and stapled down securely.

Upholstering the Back of the Chair

Upholstering the back of the chair can be a bit more challenging, but with patience and care, it can be done. Begin by cutting a piece of batting that is slightly larger than the back of the chair. Place the batting on the back of the chair, making sure it is evenly distributed and smooth. Cut a piece of fabric that is big enough to cover the back of the chair, plus a few inches extra on each side. Place the fabric on top of the batting, making sure it is centered and straight. Pull the fabric taut and staple it to the chair, starting at the top and working your way down. Make sure the fabric is smooth and there are no wrinkles or puckers. When you get to the bottom, fold the fabric neatly and staple it securely.

Conclusion

Upholstering an open back chair requires a bit of skill and practice, but with the right tools and the right technique, anyone can do it. By following the steps outlined in this article, you can get a professional-looking finish that will make your open back chair look like new again. Remember to take your time, use the right tools, and don't be afraid to ask for help if you need it. Upholstering is a fun and rewarding hobby that can save you a lot of money in the long run.