EN

how to upholster dining chair back

Views: 183 Author: Site Editor Publish Time: Origin: Site

Dining chairs are essential furniture pieces in most homes. Over time, the upholstery on the back of a dining chair can become worn out or damaged, making it necessary to reupholster it. Rather than buying a new set of chairs, reupholstering your dining chair back is a cost-effective way of revitalizing your dining area. In this guide, we will take you through the steps involved in reupholstering a dining chair back.

Tools and Materials Required

Before embarking on your reupholstering project, ensure that you have the following tools and materials:

  • Staple gun and staples
  • Screwdriver
  • Iron
  • Scissors
  • Upholstery foam
  • Fabric of choice

Strip the Chair Back

Use a screwdriver to unscrew the chair back from the rest of the chair. If the current upholstery has staples, remove them from the back using a staple remover or pliers. Be careful not to damage the cushion underneath. Strip down the chair back until you have a bare piece of wood.

Replace the Foam

Measure the chair back's dimensions and use these measurements to cut a piece of upholstery foam to size. Using a spray adhesive, glue the foam to the chair back. Leave this to dry overnight. Ensure that the foam is secure and even with no lumps.

Covering the Chair with Fabric

Lay your fabric on a flat surface and place the chair back on top of it. Cut out the fabric, leaving at least two inches of the excess; this will allow you to neatly fold the fabric over the foam and staple it to the chair's back. Using the staple gun, staple the fabric to the center of the chair's back. Take care not to staple too tight or too loose as this can cause unevenness and an untidy finish. Continue stapling the fabric on the back, ensuring the folds are neat and consistent throughout. Additionally, be sure to fold the fabric neatly around the corners.

Reattach the Chair Back

Once you have attached the fabric to your satisfaction, bring the back to the chair and use a screwdriver to reattach it to the chair. Ensure that the screws are tightly fixed and position the back evenly against the seat. In conclusion, reupholstering your dining chair back is an enjoyable and straightforward task that you can do by yourself, saving you a lot of money. Follow these steps carefully to give your dining chairs a fresh and beautiful appeal. Remember to take your time and be precise, and you'll be sure to get excellent results.

INQUIRE
×

Contact Us

captcha
×

Inquire

*Name
*Email
Company Name
Tel
*Message