how to upholster a metal chair

Metal chairs can be sturdy and long-lasting, but over time, the seat and backrest may become worn and uncomfortable. Upholstering the chair is a simple way to give it a new look and make it more comfortable to sit on. This article will provide step-by-step instructions on how to upholster a metal chair.

Materials Needed

Before starting, it is important to gather all the necessary materials. Here are the materials you will need:

• Sheet of foam padding
• Upholstery fabric
• Staple gun
• Staples
• Scissors
• Screwdrivers (if the chair is held together with screws)

Step 1: Remove the Old Upholstery

To begin upholstering the metal chair, first, remove the old upholstery. If the chair is held together with screws, use a screwdriver to remove them. Then, carefully remove the old foam padding and fabric from the seat and backrest. Be sure to take note of how the old fabric was attached to the chair, for reference later on.

Step 2: Cut a New Foam Padding

Take your sheet of foam padding and place it on the seat and backrest of the chair. Using the old foam padding as a guide, cut the sheet to the same size and shape as the old foam padding. Use scissors to make any necessary adjustments.

Step 3: Cut a Piece of Upholstery Fabric

Now, take your upholstery fabric and place it over the seat of the chair. Cut out a piece of fabric that is slightly larger than the seat, leaving enough extra fabric to be wrapped around the edges of the seat and stapled to the bottom. Repeat this step for the backrest, if applicable.

Step 4: Attach the Upholstery Fabric

Using a staple gun, begin attaching the upholstery fabric to the chair. Start by stapling the fabric to the center of the seat, pulling it taut across the foam padding. Then, staple the fabric along one side of the seat, and then the opposite side, pulling taut as you go. Do the same for the backrest, if applicable.

Step 5: Finish Upholstering the Chair

Once the fabric is attached to the seat and backrest, trim any excess fabric from the edges. Fold the remaining fabric over the edges of the seat and backrest and staple it to the underside of the chair. Be sure to keep the fabric taut as you staple it in place.

Conclusion

Upholstering a metal chair is an easy and inexpensive way to give it a new look and make it more comfortable to sit on. With just a few materials and some basic tools, you can easily transform a worn-out chair into a stylish and comfortable piece of furniture. Follow these simple steps to upholster your metal chair and enjoy a fresh, new look for years to come.