EN

how to build a wooden chaise lounge chair

Views: 140 Author: Site Editor Publish Time: Origin: Site

If you are looking for a comfortable piece of furniture to recline in the backyard, a wooden chaise lounge chair can be a great addition to your outdoor home décor. Although you can buy such a chair from a store, you can also make one yourself using basic woodworking tools and materials. In this article, you’ll learn how to build a wooden chaise lounge chair from scratch, including the wood cutting, sanding, drilling, and assembling processes.

Materials and Tools Needed

The first step in building a wooden chaise lounge chair is to gather all the necessary materials and tools. You will need:• Two 2x4x8 boards• Six 1x4x8 boards• 60-grit sandpaper• 120-grit sandpaper• Wood glue• Screws• Two 1x2x6 boards• Two 1x4x16 boards• Wood stain• Paintbrush• Saw• Drill• Jigsaw• Clamps• Measuring tape• Pencil• Safety goggles• Dust mask

Building the Frame

The first step in building a wooden chaise lounge chair is to create the frame. Cut the 2x4x8 boards into four pieces of equal length (around 60 inches) using a saw. These pieces will form the two sides of the chair. Cut the six 1x4x8 boards into 20 pieces of equal length (around 22 inches) using the saw. These pieces will form the slats of the chair. Next, lay out the four pieces of the side frame on a flat surface and attach them using wood glue and screws. This will form the basic structure of the chair frame. Then, attach the slats onto the frame using wood glue and screws, starting from the bottom and working your way up. Use clamps to secure the slats in place while the wood glue dries.

Building the Legs

Now it’s time to create the legs of the wooden chaise lounge chair. Cut two 1x2x6 boards into two pieces of the same length (around 25 inches) using a saw. These pieces will form the front legs of the chair. Then, cut two 1x4x16 boards into two pieces of the same length (around 60 inches) using the saw. These pieces will form the back legs of the chair.Use a drill and screws to attach the front legs to the front end of the side frames. Make sure the legs are perpendicular to the frame and level with each other. Then, attach the back legs to the back end of the side frames in the same way.

Finishing the Chair

Now that the frame and legs of the wooden chaise lounge chair are completed, it’s time to sand and finish the chair. Use 60-grit sandpaper to smooth out the rough edges and surfaces of the chair. Then, use 120-grit sandpaper to further smooth out the surfaces.Finally, apply the wood stain of your choice using a paintbrush. You can also paint the chair if you prefer a colorful finish. Let the stain or paint dry completely before using the chair.

Conclusion

Building a wooden chaise lounge chair can be a challenging but rewarding DIY project that can save you money and give you a stylish piece of outdoor furniture. With some basic woodworking skills and tools, you can create a comfortable chair that can provide a cozy spot to relax and enjoy your garden or poolside. Follow the steps outlined in this article to build your own wooden chaise lounge chair today!"

INQUIRE
×

Contact Us

captcha
×

Inquire

*Name
*Email
Company Name
Tel
*Message