how to set up a panhard bar

Installing a Panhard bar can help in improving the handling of your vehicle. The Panhard bar is a suspension component that aids in keeping the rear axle of your vehicle centered. In this article, we are going to discuss how to set up a Panhard bar.

Gather the Required Tools and Materials

The first step in setting up a Panhard bar is to gather all the required tools and materials that you will need for the installation. These include a Panhard bar kit, a jack, jack stands, a socket wrench, and a torque wrench. Ensure that you have all the required equipment at hand to make the installation process smooth.

Remove the Old Components

The installation of a new Panhard bar requires the removal of the old components. First, you need to remove the stock Panhard bar from your vehicle. To do this, you need to use the socket wrench to remove the nut that holds the stock bar to the frame mount. Once the nut is removed, you can slide the bar out of the frame mount. The next step is to remove the stock mount off the top end of the bar. This can be easily done with the use of a socket wrench.

Install the New Panhard Bar and Brackets

Once the old components are removed, it's time to install the new Panhard bar and brackets. Start by attaching the Panhard bar bracket to the frame mount using the bolts that came with your Panhard bar kit. Use the jack to raise the rear of the vehicle until the axle is centered. Once the axle is centered, you can slide the Panhard bar into the mount on the vehicle's axle. Finally, use the Panhard bar's bracket to secure it firmly to the frame.

Adjusting the Panhard Bar Height

The last step in setting up a Panhard bar is adjusting its height. You need to adjust the Panhard bar height until it is level with the ground. To do this, use the jack to raise the vehicle's rear until the tires are off the ground. Use a tape measure to measure the distance between the middle of the rear axle to the middle of the Panhard bar. Once you have this measurement, adjust the Panhard bar height until the measurement is equal. Finally, use the torque wrench to tighten all bolts and nuts to the manufacturer's recommended torque specifications.

Conclusion

In conclusion, setting up a Panhard bar is not a difficult task if you have all the required tools and materials at hand. Remember to follow the manufacturer's instructions and use the torque wrench to ensure all bolts and nuts are tightened to the proper specifications. With the Panhard bar installed, you can experience improved handling and stability while driving your vehicle.