how to waterproof outdoor wooden furniture

If you have wooden furniture outside, you need to make sure that it is waterproof to avoid any damage due to humidity or rainfall. Waterproofing outdoor wooden furniture takes some time and effort, but it’s not difficult to do. Here are some steps to follow:

1. Clean the surface of your furniture

The first step is to clean your wooden furniture to remove any dirt and debris. Use a soft-bristle brush or a cloth soaked in water and soap to clean off any loose dirt or grime. After you’ve cleaned the surface of your furniture, let it dry completely.

2. Sand the surface of your furniture

Once your furniture is dry, make sure to sand the surface. Sanding the surface helps remove any imperfections, splinters, or rough edges on your furniture. Start with a coarse sandpaper of around 100 grit and sand the entire surface of your furniture. When you’re done, switch to a fine sandpaper of around 220 grit to smooth out the surface.

3. Apply a wood sealer

Next, apply a wood sealer to your furniture. A wood sealer is a protective coating that helps prevent water damage by repelling water from the surface. Apply the sealer using a brush or roller, and make sure to cover the entire surface of your furniture. Allow the sealer to dry completely before proceeding to the next step.

4. Apply a waterproofing solution

After the wood sealer has dried, it’s time to apply a waterproofing solution to your furniture. There are different types of waterproofing solutions available, but the most popular ones are based on oil or wax. Apply the waterproofing solution in a thin layer, using a brush or roller, and make sure to cover the entire surface of your furniture. It’s recommended to apply more than one coat of waterproofing solution for better protection.

5. Allow time for drying

Once you’ve applied the waterproofing solution to your furniture, allow it to dry completely. Drying time varies depending on the type of waterproofing solution used, so make sure to read the label instructions carefully. After your furniture has fully dried, it’s recommended to give it an extra coat of sealant for added protection.

In summary, waterproofing your outdoor wooden furniture requires cleaning, sanding, applying a wood sealer, and then a waterproofing solution. Once you have followed these steps, you can enjoy your beautiful and protected furniture for years to come.