Upholstering a chair can be a daunting task, especially if the chair has not been upholstered before. However, it is a great way to give an old or plain chair a fresh and new look. This article will guide you through the process of upholstering a non-upholstered chair.
Before starting the upholstery process, it is important to gather all the necessary materials. These include:
The first step in upholstering a non-upholstered chair is to prepare the chair. This involves removing any old material that may be on the chair. Use pliers and a flat-head screwdriver to remove any staples, tacks or nails from the chair. Next, sand the chair if necessary to smooth out any rough spots. Finally, clean the chair to remove any dust or debris.
To upholster the chair, first cut a piece of plywood to fit the seat of the chair. Next, cut a piece of batting slightly larger than the plywood. Place the batting on top of the plywood and staple it in place, starting from the center and working your way out.Cut a piece of fabric to size, leaving a few inches of extra fabric on each side. Place the fabric over the batting and plywood, making sure it is centered. Pull the fabric tightly over the seat and staple it in place underneath the seat. Be sure to staple one side and then the opposite side to ensure that the fabric is even. Trim any excess fabric.To upholster the back of the chair, cut a piece of fabric to size and staple it to the chair top to bottom. Use a tack strip to secure the fabric along the sides of the chair. The tack strip will hide the staples and give the chair a finished look.
To finish the chair, add any finishing touches such as decorative trim or buttons. These can be added at the end of the upholstery process to hide any staples or give the chair a unique look. In conclusion, upholstering a non-upholstered chair is a great DIY project and can give an old, plain chair a new life. With the right materials and preparation, it can be an easy and rewarding process.